JunPus

JunPus thermal compounds deliver advanced heat dissipation solutions tailored for high-performance AI chips, CPUs, GPUs, and 5G base stations.

Engineered for cutting-edge semiconductor technologies,

our patented thermal pastes optimize thermal conductivity, ensuring stable performance under intensive workloads. Trusted across electronics, data centers, and telecommunications

JP6080 Reworkable
Thermal Gel

Two proposed JunPus JP6080 dispensing cartridges with dark blue caps shown diagonally
Illustrative thermal interface with blue gel between two surfacesThermal interface illustration

JP6080 typical
thermal properties

Supplier reference data
(typical values; not a JunPus specification).

Thermal conductivity
8.0 W/(m·K)
Viscosity
1,000 Pa·s CP52, 1 rpm
Cured specific gravity
3.2 cured, dimensionless
Cure time at 60 °C
8 h
Color
Blue
Model
JP6080

Typical values are not for specification writing. Confirm suitability and test conditions with JunPus before using these values for design or procurement.

Reworkable silicone
gel features

The gel conforms to the interface and cures into a soft, elastic layer. It can be evaluated as an alternative to a preformed pad.

Single-component silicone gelDispensable or screen printableIndustrial use only

Thermal gel
material reference data

Supplier reference data (typical values; not a JunPus specification).

JP6080 supplier typical thermal gel properties and conditions
Property or condition Supplier typical value
Color Blue
Viscosity 1,000 Pa·s CP52, 1 rpm
Extrusion rate 320 g/min
Specific gravity 3.2 cured, dimensionless
Cure time at 60 °C 8 h
Cure time at 100 °C 60 min
Shore hardness 50 Shore 00
Tensile strength 0.3 MPa
Elongation at break 72%
Dielectric strength 16 kV/mm
Volume resistivity 5.9 × 10¹⁴ Ω·cm
Thermal conductivity 8.0 W/(m·K)
Shelf life 12 months 0–10 °C, from date of manufacture

Store in the original, tightly sealed package. Shelf life is counted from the date of manufacture when stored at 0–10 °C.

Thermal gel dispensing
and curing

For CPU and memory packages or PCB assemblies. Confirm substrate compatibility, maximum assembly load and desired bond-line thickness before production.

  1. Acclimate before use.
    Supplier recommends 30–60 minutes at room temperature.
  2. Dispense or screen print.
    Slow cure begins at ambient temperature; no room-temperature cure time is specified. Supplier reports compression down to 50 µm under unspecified conditions; verify for your assembly.
  3. Cure under validated conditions.
    Typical supplier schedules are 8 h at 60 °C or 60 min at 100 °C.

Chip-to-heatsink
thermal interface

Chip package → cured gel interface → heatsink. Confirm bond-line thickness, contact load, and thermal performance in your assembly.

−45 to 200 °C is general supplier guidance for silicone gel, not a qualified JP6080 operating range.

Automated dispensing nozzle applying blue thermal gel to a chip package on a PCB fixture
Illustrative automated dispensing setup. Confirm material and process settings for your assembly.

Handling and technical resources

For industrial applications. Refer to the approved SDS and container label before use.

JP6080 technical documents

Contact JunPus to confirm technical documentation, packaging and availability.

Discuss your
thermal application.

Confirm your substrate, process and operating conditions with JunPus.

Contact JunPus

JunPus

Performance Starts with Superior Thermal Connectivity.For OEM/ODM products please go to JunPus International Co., Ltd.

Our Company
Customer Services
Contact Info

Do you need assistance?

For any questions or concerns, you can reach us via our contact form